ip address-public ip address range

IP address is topic for today. So I’m going to explain here everything you need to know about IP address.

Because you’ll learn here what is meaning of IP . And how it’s use as well as what are different types of IP . So keep reading to know everything right now.

IP Address what is

It’s important because you’re using laptop,computer, mobile and other devices, which uses IP  to connect with internet globally.

So every device uses an unique IP  for identification to connect globally.

It is an internet protocol address (IP ) and is a numerical number level like

Which assign to each device to make a computer network that uses the internet protocol for communication.

IP  allow a device to communicate with other devices over an IP based network like the internet.
Because an IP  has many parts just like an address location of your house globally.
Now for example suppose your house location address is written as 316 Janpath road New Delhi India then here.
316  – house number
Janpath road  – Street
New Delhi  – City
India  – Country

 So An IP  provides an identity to a network device.Similar to a house physical address location.

Devices on network globally differentiated by from one another through IP .

How IP address locator use to communicate ?  

Suppose i am going to send a package to my friend in another country.
Before sending package i have to know the exact destination, It’s not enough to send package only by his name and expect to deliver him.
I must required to attached a specific address to it which you look up in your phone diary.
So this same general process is used when sending data over the internet.
However we use phone diary to look up physical address,Our computer uses DNS Servers to look up a hostname to find its IP .
And this is called Ip Address locator.
Now for an example when i enter a website like www.physicseasytips.com into my browser my request to load that page is sent to DNS servers.
And which look up that hostname (physicseasytips.com) to find its corresponding IP  (
when we request by entering hostname to DNS servers our computer IP  is also sent to DNS servers.
After finding hostname corresponding IP  DNS servers allow to load that page to your compute.

IP Address to Location

Without the IP  attached, my computer will have no clue where to go.
A Computer address is called its IP  visiting a website is really just your computer asking another computer for an information.
Your computer send a message to the other computer IP , and it also sends along its origin address, So the other computer knows where to send its response.
And this’s IP address to Location
IP  is virtual map of  computer network over the Internet, Which is just use to locate any host within the network.
Without IP  you’re not able to locate any host on the network, So to connect with network IP is required. 
And this IP help to  find the Physical location of any host connected with the network.
#For Example:
If you’re connected with internet from USA , UK, so you’ll assign IP from same country. 

IP to address lookup for different types of IP addressing 

There are two types of addressing 

  • 1 Physical addressing (Only name no complete address eg MAC address 48 bits).
  • 2 Logical addressing316 Janpath road New Delhi India complete address eg IP

Now in IP address there are two version first IPv4 and second is IPv6 here in this post we will learn and discussed only IPv4 latter on will discuss IPv6.

So In IPv4 there are again two types of IP  first is Public IP and second one is Private IP 

IP is that identity from which you reach in the network from one place to other place.

For example if you want to send a piece of information from India to globally anywhere out India or any part of India.

So with the help of IP address identity you can send your information anywhere.

IP  is 32 bits logical address having 4 octet in each of the octet minimum to maximum value range is 0 to 255 only. So it’s IP to address lookup.
IP  is made by two entity one is Network ID and other is Host ID its simple means.
IP address  →→ Network ID + Host ID
See the below picture.
IP address-public IP address range
Remember always 4 octet in IP address it can’t be 3 octet and maximum value in any octet is 255 can’t be 256 in any of the four octet.

Different classes of IP address

There are five different IP  classes, Which are given below with their numerical minimum and maximum values.
1 Class A →  to 
2 Class B→  to
3 Class C→  to
4 Class D→  224  to 239
5 Class E→  240  to 255
We generally use IP addresses of Class A, B and C. However Class D is use in multitask, Class E is use in research.
Class A is used for large network buildup and class C is used for small network for example if you want to setup small network like 100,200 computer to connect on network.
then you have to choose IP  of Class C.

IP address network

There are two type of IP  network one is private IP network and other is public IP network.

We generally use private IP network, where you are free to choose any IP  according to classes.

But for public IP  you have to buy public IP from IP allocation agency IANA Internet Assigned numbers authority.

Now from above classes you can see class A end with 126 and class B start with 128 .

So then question arises where is 127 ? actually 127 is reserved for special purpose loop back address

So full range, Loop back is use to check NIC (network interface card) status and network issue when your system is not connected with internet.

How to recognize classes of a given IP address ?

it is simple to recognize classes of any given IP  only you have to remember the range of each classes.
For an example can you tell me class of this IP address belong, To know the class of this IP address,.
Because you have to see only first octet which is 137 then you have to check Class A end with 126 .
so it is not belong to class A, Now class B start with 128 and end with 191 hence 137 is in between this range so belong to class B.
Hence for any IP class check see the first octet number only where does this lies in all the five classes mentioned above.
And this will give you exact classes of that IP . 

How to find Network ID of given IP address ?

IP Address→→→Network ID + Host ID
Here from above picture it clear Class A, Class B, Class C four Octet value for Network ID and Host ID.
Hence to know the Network ID of any class IP  put Host ID value 0 you will get Network ID of that Class.
for example given IP what will be Network ID of this IP ?.
Ans  IP address→→→  10.1115.20.30  (This IP  of Class A) 
Network ID→→→  
# tags Find Network ID for IP
 (This IP  belong to class B) 
Network ID→→  
# tags Find Network ID for IP
(This IP  belong to class C)
Network ID→→
This is so simple to find network ID for any given IP .

How to find subnet mask of a given IP ? 

Lets see it by example IP find its subnet mask.
Here we see that this IP  belong to Class A, Hence first find its Network ID we have learned above Network ID will be
Now we know that one octet having 8 bits now important point Network ID bits will be represented by 1 and Host ID bits by 0  then it will look like.
See below, how to convert into decimal number 
11111111.00000000.00000000.00000000    now convert this to decimal number
255    .         0      .       0       .       0 This is subnet mask
Take an another example IP find its subnet mask.
Here first you have to see IP belong to which class, So it is clear this IP  belong to Class B.
Then write down its Network ID hence Network ID will be
Now replace Network ID by bits putting each bits of Network ID by 1 and Host ID each bits by 0 then it will look like.
11111111.11111111.00000000.00000000   (now convert this binary bits into decimal value)
 255     .    255    .       0        .       0           (This is subnet mask for IP

How to convert decimal IP  into binary easily ?

it is really very easy and simple method to convert decimal IP  into binary.
lets take an example IP write down number like this.
2⁷       2⁶       2⁵      2⁴      2³       2²       2¹        2⁰
128     64      32     16      8        4        2          1
1          1        0       0       0        0        0          0 ←192   (* Adding 128 and 64 gives 192 ) 
1          0        1       0       1        0        0          0 ←168   (* Adding 128,32,8 gives 168 )
0          0        1       0       0        1        0          1 ← 37    (Adding 32,4,1 gives 37 )
1          1        0       0       1        0        0          0 ← 200  (Adding 128,64,8 gives 200 )
Above method is very simple to convert decimal IP in binary.
So use logic simply which number addition gives decimal number value put 1, 1 to that number place and rest put 0,0
you will get 8 bits binary number for that decimal number hence decimal IP will look like this.
 192               .                 168             .                 37                  .            200
11000000          .         10101000            .         00100101              .        11001000  

Private IP   

Private IP  is that IP which you no need to buy suppose in your organization.
you want to connect 50 or 100 computer then you can use private IP  to assign each of your computer to communicate on network.
Some private IP addresses reserved are like this.
Private IP address Class A
Private IP address Class B  172.16.x.x
Private IP address Class C  192.x.x.x
So these are private IP reserved for Lan these IP can’t use on internet network.

How many Host can connect to an IP ?

Lets take an IP address what do you think about this IP ?.
Hey if you remember this is Network ID for class B hence suppose i have purchased this Network then how many IP .
i can distribute or allocate on this network or how many Host can use this network.
Broadcast ID→→→  to find out broadcast ID of a Network ID simply give the maximum value to Host ID it will represent broadcast ID
Network ID→→→
Broadcast ID→→→
Now number of usable host →→→ 2¹⁶ -2 = 65,534  host can allocated to IP  on this network ID.

Who IP address lookup

How it is calculate simply see how many Host ID bits are available .raise two to the power host bits available minus two will give you number of usable hosts.
now why here minus 2 subtracted from total number ? because two IP  are reserved first for network ID and last for broadcast.
so minus two is done because these two IP are reserved for special purpose it can’t be use for Hosts. 
Q IP address find Network ID, Broadcast ID and number of usable hosts.
This question is for you.
We will continue in next post i hope you have enjoyed learning IP address-public IP address range. if  this article is helpful for you then like  share  keep learning more and more.
Dated 14th Oct 2018